Call for Papers

We are inviting the submission of scientific or technical papers for the “ICEUBI2017 – International Congress on Engineering under the theme: “A Vision for the Future”.

        

In this edition the ICEUBI 2017 will receive papers in two categories:

  • Full Paper – Article with 10 pages that presents the results from theoretical or empirical scientific research, including the presentation of the theoretical foundation, methodology, research data and analysis or discussion of results. Accepted Full Papers should be presented orally in the Parallel Sessions of the event.
  • Short Paper – Article from 5 to 7 pages that present the initial or complete results from empirical or theoretical scientific research, including the presentation of the theoretical foundation, methodology, research data and analysis or discussion of results. Accepted Short Papers must be presented as Posters during the event.

 Important!

  • The article can be presented in Portuguese, Spanish or English.
  • A maximum of one full paper or short paper may be accepted by the author.
  • No inclusions/exclusions of new authors after the submission of articles will be accepted.
  • In order for an accepted paper to be presented at the Congress, at least one of the authors should be registered.
  • All papers accepted and presented at the event will be published in the proceedings of the event and book of abstracts.
  • The authors of the best full articles presented at the Congress will be invited to submit an extended version (special topic) to be published in scientific journals (Ex.Open Engineering).
  • The work must be submitted in accordance with the rules of IEEE.
  • The presentation of works will be made through the platform (ongoing).

Double-blind review:

This journal uses double-blind review, which means the identities of the authors are concealed from the reviewers, and vice versa. To facilitate this, please
include the following separately on the ICEUBI2017 platform (LINK):

  • Title page (with author details): This should include the title, authors’ names, affiliations, acknowledgements, and a complete address for the corresponding author including an e-mail address.
  • Blinded manuscript (no author details): The main body of the paper (including the references, figures, tables and any acknowledgements) should not include any identifying information, such as the authors’ names or affiliations.

 

Important Dates

September, 8 (NEW)!

Submission of Full Paper for Review

October, 18
Acceptance of Papers

November, 3 
Submission of Revised Papers

REMEMBER…

  • Only papers submitted through  ICEUBI 2017 platform will be assessed;
  • The authors must not be identified in the papers file, this information must be submitted separately in the ICEUBI 2017 platform;
  • After approval, the papers should be corrected (if necessary) and the submitted author’s first page data will be used to be published in the ICEUBI2017 Proceeding.

Thematic Sessions

TS1 – Emerging Geomaterials and Construction Ecology – See more
Isabel Falorca (UBI, PT)
TS2 – Fire Engineering and Natural Disasters
Paulo Von Kruger (UFMG, BR)
TS3 – Off-site Construction-Challenges and Trends
Luis Otavio Araujo (UFRJ, BR)
TS4 – Innovative structural materials
Marcin Gorski (SUT,PL)
TS5 – Rehabilitation of buildings and satisfaction of contemporary requirements – See more
Eduardo Qualharini (UFRJ, BR), João Lanzinha (UBI, PT)
TS6 – Structural Engineering, Dynamics and Control
Rui Carneiro Barros (FEUP, PT), Manuel Braz Cesar (IPB, PT)
TS7 – Food Science and Engineering
Raquel Guiné (IPV, PT), Paula Correia (IPV, PT)
TS8 – Geographic Information Systems Applied to Engineering
Jorge Gonçalves (UBI, PT), Bertha Santos (UBI, PT), Pedro Almeida (UBI, PT)
TS9 – Transport Infrastructures
Bertha Santos (UBI, PT), Jorge Gonçalves (UBI, PT), Carmen Carvalheira (ISEL, PT), Silvíno Capitão (ISEC, PT)
TS10 – Geographic Engineering, Geodesy and Topography – See more
Pedro Almeida (UBI, PT), Rui Fernandes (UBI, PT), Bertha Santos (UBI, PT)
TS11 – Sustainable materials and building technologies – See more
Ana Briga de Sá (UTAD; PT), João Lanzinha (UBI, PT)
TS12 – Materials, to serve the smart building
GHERIS Abderrahim (USA, ALG)
TS13 – Materials and health
GHERIS Abderrahim (USA, ALG)
TS14  – Nonlinear Filtering and Control of Uncertain Systems
Kouamana Bousson (UBI, PT)
TS15 – Air Transport – See more
Jorge Silva (UBI, PT), Rosário Macário (IST, PT)
TS16 –  Fibrous Materials – See more
Rogério Simões (UBI, PT)
TS17 – RE-Architectures
Jorge Jular (UVA; ES)
TS18 – Trends and technologies in agriculture and agroindustry
Pedro Dinis Gaspar (UBI, PT), Pedro Dinho da Silva (UBI, PT), José Nunes (IPCB, PT) e Luís Andrade (IPCB, PT)
TS19 – Traditional domestic spaces: new perspectives for its actualization
María Teresa Pérez Cano (US, ES), Ana Maria Tavares Martins (UBI, PT); Eduardo Mosquera Adell (US, ES)
TS20 – Teaching research and architectural practice
José Manuel Pedreirinho (O.A., PT), Ana Maria Tavares Martins (UBI, PT) e María Teresa Pérez Cano (US, ES)
TS21 – Postgraduate Teaching: Dissertation vs. Project
Ana Maria Tavares Martins (UBI, PT); Inês Daniel de Campos (UBI, PT) e Eduardo Mosquera Adell (US, ES)
TS22 – Public Art and Urban Development: an Interdisciplinary Perspective in Time and Space – See more
Helena Elias; Inês Marques e Rita Ochoa (UBI, PT)
TS23 – Integration and management of energy and water systems – See more
António Espirito Santo, Cristina Fael, Fernando Santos, José Páscoa (UBI, PT)
TS24-Cities, Intersectionality and Participation: Other ways of doing it? 
Patrícia Santos Pedrosa, (UBI, PT) Joana Pestana Lages (CIAUD/FAUL, PT)
TS25-Challenges in urban landscape and public space – See more
Anna Marta Wlodarczyk (UASN; PL)
TS26-POLIS Projects: Territorial, urban, architectonic, constructive, and technological impacts, after Expo98 – See more
Paulo Tormenta Pinto (ISCTE-IUL, PT), João Paulo Delgado (UBI, PT), Vitor Mingacho (Dinâmia/CET, PT)
TS27-Thinking Architecture: Structure and Composition as protagonists
Paula Rainha (UBI, PT)
TS28-Propulsion System
Francisco Brójo, Miguel Ângelo Silvestre, José Páscoa (UBI, PT)
TS29-Impressions in the Territory: risks, development, culture and tourism in architecture and engineering
Cláudia Beato e Luís Moreira Pinto (UBI e CITAD, PT)
TS30-Indoor Environmental Quality – See more
Manuel Ramiro Dias Pastorinho (UBI, PT), Ana Catarina Sousa (UAv, PT)

Conference Topics

CT1 – Aero and Hydrodynamics
CT2 – Aeronautics and Astronautics
CT3 – Agronomic and Forestry
CT4 – Architecture, Design and Urban Planning
CT5 – Bioengineering and Biotechnology
CT6 – Chemistry
CT7 – Computer Science
CT8 – Construction
CT9 – Electrotecnics and Electronics
CT10 – Energy
CT11 – Environment
CT12 – Geotechnics, Geologics and Mining
CT13 – Industrial Management, Production and Maintenance
CT14 – Instrumentation, Automation and Control
CT15 – Materials
CT16 – Mathematical Methods in Engineering
CT17 – Mobility and Transportation
CT18 – Naval
CT19 – Physics
CT20 – Rehabilitation and Sustainability
CT21 – Space Systems and Geographic Information
CT22 – Structures
CT23 – Teaching Engineering
CT24 – Technological Innovation and Product Development
CT25 – Technological Design
CT26 – Telecommunications
CT27 – Textile
CT28 – Transport Phenomena
CT29 – Other Engineering Topics

Rules

The following rules apply to the presentation of papers:

1. The article submitted to ICEUBI 2017 will be mainly evaluated by its scientific merit, in accordance with the main Topic or Thematic Session chose by the author(s) in the presentation of the document that is sent for evaluation through the ICEUBI 2017 (ongoing) platform;

2. The drafting and presentation of the text require that it meets the standards of the IEEE Citation Style. The text must be written in Trebuchet MS size 10 with 1.0 of space. The design of the page must be Paper A4 (29.7 x 21 cm), with margins: top (3.2 cm), left (3 cm), bottom (2.5 cm) and right (2 cm); download template

3. The article should be 10 pages for full articles (Full Paper) and 5 to 10 pages for short articles (Short Paper) including introduction, methodology, analysis and discussion of results, conclusions and references;

4. The charts, tables, graphs and illustrations (black and white or in colour) should be included in the main document in the order in which they appear in the text and written in Trebuchet MS size 8;

5. The article can be presented in Spanish, Portuguese or English. Please do not include here any identification, abstract or keywords. These elements will be inserted directly into the web platform for paper submission.The abstract only will be accepted in English as well as the keywords in the article, abstracts must not exceed the 250 words;

6.  A maximum of up to five authors for each article will be allowed;

7. The article must be unique. Shall not be considered articles that have been published in full or partially in scientific events of any kind;

8. The article cannot be subjected to simultaneous evaluation for another scientific event;

9. The editor may accept or not the article submitted for publication, in accordance with the editorial policy;

10. The editor may or may not accept an article after it has been evaluated by the system of double-blind (double blind review), which guarantees the anonymity and confidentiality of both the author(s) as the arbitrators;

11. The editor may suggest changes in the article regarding its content and/or in relation to the drafting and presentation in accordance with IEEE;

12. The article must be written correctly in terms of grammar. Referees will not make any corrections;

13. Article approved for publication must be submitted to the final editing with the suggested templates for the event. The spelling and grammar are responsibility of the author(s) of the article;

14. Article will be automatically rejected by the system if the author(s) does not agree to the terms of singularity, originality and copyright;

15. The editor and/or any person or institution linked to their collective bodies are not responsible for the opinions, ideas, concepts and positions expressed in the texts, this being the sole responsibility of the author or authors;

16. Evaluations are conducted in forms of standardised evaluation, with space for their own observations, which are sent to the author (s) in the case of conditional acceptance, corrections or rejection;

17. The article must be submitted online through the web page: LINK
The proceedings used by the ICEUBI 2017 for citations and references are in conformity to the standards of the standards of the IEEE Citation Style. The following link provides a brief summary and examples of these standards for the guidance of the authors of the articles to be submitted:  IEEE Citation Style.

18. After review and approval, the authors are given a period of time to include changes that are requested.

Opportunities for scientific publication

OPEN ENGINEERING

Open Engineering (https://www.degruyter.com/view/j/eng) is an open access, peer-reviewed, electronic-only journal, indexed in Scopus and in Web of Science Core Collection (Emerging Sources Citation Index). Open Engineering publishes research results of wide interest in emerging interdisciplinary and traditional engineering fields.

All participants of ICEUBI2017 are kindly invited to submit their conference papers to the special issue launched by Open Engineering and that they can find all the details how to do it on the website: http://degruyteropen.com/iceubieng/

NOTE: To publish in this journal an extra fee of 400€ per paper will be applied!

Journal Metrics

*This value is calculated using ResearchGate data and is based on average citation counts from work published in this journal. The data used in the calculation may not be exhaustive.


Opportunities for scientific publication

Case Studies on Transport Policy

Transport policy is a multidisciplinary field where engineering, economics, sociology and law must come together in well-articulated and effective solutions. Despite being a field of effective intervention, most scientific publications address transport policy with a theoretical and often abstract approach, making its understanding difficult for non-senior academics and even more opaque for practitioners. While the merits of case study methods both for undergraduate and graduate teaching are recognised, academics struggle to find empirical material that provides objective and operational illustration of the theories and approaches lectured. This is a major barrier not only in the teaching context but also for practitioners.

Case Studies on Transport Policy covers this gap by providing a repository of relevant material to support teaching and transferability of experiences. Observation of field experience highlighting the details and drawbacks of implementation is invaluable to show how Transport Policy can be applied in the operational field, maintaining consistency with strategic options. Teaching with case studies introduces students to challenges they may face in the real world, and provides a very rich learning method for executive training at every institutional level. For practitioners, and specially governments, case studies are a powerful tool to show the potential benefits from policy measures and packages.

Case Studies on Transport Policy and its sister journal Transport Policy provide a valuable reference for the specialised study of transport policy offering in-depth theoretical analysis and detailed case study description and analysis, and in this way providing very complete material for decision makers planners and practitioners to undertake transferability of experiences.

Journal Metrics

Opportunities for scientific publication

Millenium- Journal of Education, Technology, and Health” is a multidisciplinary international journal. It is also a scientific peer review journal, with an open-access publication, completely free (without charges for publication for the authors). This Journal is a property of the Scientific Center (CI&DETS) of the Polytechnic Institute of Viseu.

To access all the information about the Millenium Journal, the link to the home page of the journal is: https://revistas.rcaap.pt/millenium

Papers

Papers should be sent through ICEUBI 2017 application( link).

use this link to submit your paper

Remember, first; you need to register using an email; then you have to activate your account (please check the spam email if you do not find the confirmation email in your inbox) with the confirmation link provided; only then it is possible to use the login link.

Link – COPYRIGHT – DIREITOS DE PUBLICAÇÃO – DERECHOS DE PUBLICACIÓN


  • Papers Templates

    _

    Format your papers as the following templates:


         

    Link – COPYRIGHT – DIREITOS DE PUBLICAÇÃO – DERECHOS DE PUBLICACIÓN


    Double-blind review

    This journal uses double-blind review, which means the identities of the authors are concealed from the reviewers, and vice versa. To facilitate this, please
    include the following separately on the ICEUBI2017 platform (LINK):

    • Title page (with author details): This should include the title, authors’ names, affiliations, acknowledgements, and a complete address for the corresponding author including an e-mail address.
    • Blinded manuscript (no author details): The main body of the paper (including the references, figures, tables and any acknowledgements) should not include any identifying information, such as the authors’ names or affiliations.

    Please do not include here any identification, abstract or keywords into the blinded manuscript. These elements will be inserted directly into the web platform for paper submission.

    _


  • For questions please contact the Scientific Committee at the following address: iceubi2017@ubi.pt .

Paper Submission

Oral Presentations

Oral Presentations

  • All oral presentations should be prepared in Microsoft PowerPoint or Acrobat and uploaded and checked at least 10 minutes before the beginning of the session.
  • The presentation is scheduled to last 10-15 minutes including questions and discussion.
  • The author should provide the chairperson with a hard copy of the paper and a short CV (5 lines maximum).
  • Session timings are listed in the Technical Final Program.

Templates:

             

Aerospace Sciences Department, Engineering Faculty, University of Beira Interior (UBI)
ASA, S.A. – Aeroportos e Segurança Aérea de Cabo Verde
Bydgoszcz University of Science and Technology
C – MADE – Centre of Materials and Building Technologies, University of Beira Interior
Câmara Municipal de Ílhavo
Centre for Mechanical and Aerospace Science and Technologies (C-MAST ), Universidade da Beira Interior
Centro Universitário UNINOVAFAPI
CERIS – ICIST, DECivil, Instituto Superior Técnico, Universidade de Lisboa
CI&DETS Research Centre, ESAV, IPV
CI&DETS Research Centre/Dep. Food Industry-ESAV, Polytechnic Institute of Viseu, Portugal
CISE – Electromechatronic Systems Research Centre
Civil Engineering Department, Faculty of Science and Technology, University of Souk Ahras, Algeria
CONSTRUCT – Gequaltec / Faculdade de Engenharia da Universidade do Porto
Dep. Civil Engineering, Instituto Superior Técnico, University of Lisbon, Lisbon, Portugal
Departament of Strutural Engineering, Silesian University of Technology, Gliwice
Departamento de Engenharia Civil, Faculdade de Ciências e Tecnologia da Universidade de Coimbra
Departamento de Engenharia Electromecânica, Universidade da Beira Interior
Département de génie civil, faculté des sciences et technologies Université Mohammed el Bachir el Ibrahimi Bordj Bou Arreridj , Algeria
Département de Génie Civil, Université de Souk-Ahras, Algérie
Département de Technologie, Faculté des Sciences et de la Technologie Université de Djilali Bounaâma- Khemis miliana, Ain Defla, Algeria
Department of Civil Engineering and Architecture, University of Beira Interior, Covilhã, Portugal
Department of Civil Engineering, Faculty of  Science and Technology, University of Bordj Bou Arréridj
Department of civil engineering, faculty of Technology, M’sila  University,  Algeria
Department of Civil Engineering, Mohamed Cherif Messaadia University, Souk-Ahras, Algeria.
Department of Electrical Engineering, Faculty of Sciences and Technology, New University of Lisbon
E.T.S. Arquitectura de Valladolid
Escola de Arquitetura da UFMG
Escola Superior de Tecnologia do Barreiro do Instituto Politécnico de Setúbal
Faculdade de Ciências e Tecnologias da Universidade Nova de Lisboa
Faculdade Laboro
FibEnTech, University of Beira Interior, Covilhã
Geomaterials Development Laboratory, Civil Engineering Department, M’sila University, M’sila, Algeria.   Institute of Technical Urban Management, University of M’sila Algeria
IFG
Institute of Nuclear Techniques, Budapest University of Technology and Economics (NTI-BME)-Budapest, Hungary
Institute of Nuclear Techniques, Budapest University of Technology and Economics, Budapest, Hungary
Instituto de Telecomunicacoes e Departamento de Informatica, Universidade da Beira Interior, Portugal
Instituto Militar de Engenharia
Instituto Nacional de Saúde Dr. Ricardo Jorge, Departamento de Saúde Ambiental, Porto, Portugal
Instituto Politécnico da Guarda
Instituto Politécnico de Castelo Branco
Instituto Politécnico de Coimbra, Instituto Superior de Engenharia de Coimbra
Instituto Superior de Engenharia de Coimbra
Instituto Superior de Engenharia de Lisboa
Instituto Superior Tecnico, Universidade de Lisboa
IP – Infraestruturas de Portugal, S.A.
IPC/ISEC
ISCTE-IUL
ISEL – Instituto Superior de Engenharia de Lisboa
Istanbul Aydin University, Anadolu Bil Vocational School, Automotive Technology
LAETA/UBI – AeroG, Laboratory of avionics and control, Department of Aerospace sciences, University of Beira Interior
Lublin University of Technology
Masters in Built Heritage and Sustainable Environment of the  Federal University of Minas Gerais
RISCO, Departamento de Engenharia Civil, Universidade de Aveiro
School of Technology & Management (ESTGV) – CONSTRUCT-LFC
School of Technology and Management, Polytechnic Institute of Braganca, Campus de Santa Apolonia, 5300-253 Braganca
SEMB, Sustainable Energy Machinery and Building. University of Lleida. Address: Edifici CREA, Universitat de Lleida, Pere de Cabrera s/n, 25001-Lleida, Spain.
Silesian University of Technology
Suleyman Demirel University Technology Faculty Mechatronics Engineering
UFF – Universidade Federal Fluminense
UFMG – Escola de Arquitetura
UFMG – Universidade Federal de Minas Gerais
ULHT/ECATI/CICANT
UNB- Universidade de Brasília/ Brasília -DF/ Brasil
Univ. da Beira Interior, Dep. Eng. Civil e Arquitetura, Covilhã
Univ. Lyon, ENTPE, IFSTTAR, LICIT
Universidad de Castilla-La Mancha.
Universidad de Valladolid
Universidad de Valladolid (UVA, Spain)
Universidade de Coimbra
Universidade de São Paulo
Universidade Federal de Goias
Universidade Federal de Juiz de Fora
Universidade Federal de Minas Gerais
Universidade Federal de Minas Gerais – UFMG
Universidade Federal de São Carlos
Universidade Federal do Rio de Janeiro
Universidade Federal Fluminense
Universidade Lusófona
Universidade Lusófona de Humanidades e Tecnologias
Universidade Nova de Lisboa
Universidade Presbiteriana Mackenzie
Universidade Zambeze
Universiry of Bordj Bou Arreridj
Universitat Rovira i Virgili
University Beira Interior
University Ceuma (UniCeuma), São Luís, MA
University Ceuma (UniCeuma), São Luís, MA
University of Beira Interior
University of Coimbra
University of Lublin University  of Technology
University of Minho
UTP University of Science and Technology in Bydgoszcz / Faculty of Civil and Environmental Engineering and Architecture
Western Sydney University
Wroclaw University of Science and Technology

 

This is a list of ICEUBI2017 Authors.

A | B | C | D | E | F | G | H | I | J | K | L | M |N | O | P | Q | R | S | T | U | V | W | X | Y | Z

top

A

A D Reis
A.P. Costa
Abdelmadjid Chouabbi
Abderrahmane Boumezbeur
Abilio P. Silva
Abilio Silva
ACHOUR Yacine
Adérito N. Alcaso
Aditya Mushyam
Adriana Domingos
Adriana Marques Silva
Adriana, UFMG
Alberto Simões
Alcinia Zita Sampaio
Alessandra dos Santos Ribeiro
Alex Ximenes Naves
Alexandra Maria Galvão Ribeiro
Alexandra Moutinho
Alexandra Oliveira
Alexandre Miranda
Alfonso Pappalardo Junior
Álvaro Moral García
Álvaro Vieira
Ana C. Correia
Ana C.A. Sousa
Ana Campos
Ana Clara Carvalho da Purificação
Ana Costa
Ana Cristina Briga de Sá
Ana Cristina Correia
Ana Cristina Ferrão
Ana F. Couvinhas
Ana Ferreira
Ana Ferreira Ramos
Ana Filipa Santos Silva
Ana L. T. S. da Motta
Ana Lídia Virtudes
Ana Oliveira
Ana P. Costa
Ana Paula Costa
Ana R. B. Lyrio
Ana Reigones
Ana Rita Carrico Silva
Ana Rita Ochoa
Ana Rita Reigones
Ana Sofia Almeida
Ana Sofia Gomes Pereira
Ana Sofia Leonardo Vilela de Matos
Anabela Correia de Paiva
Andre C Marta
Andre Filipe dos Santos Martins
André Filipe Saraiva Coelho Tomé
André Marta
Andreia Cristina Fonseca Alves
Andreia S. Silveira
Andreia Sofia Moreira Martins
Aneta Zmij
Anna Bazan-Krzywoszańska
António Abreu
Antonio Albuquerque
Antonio D. Reis
António Eduardo Vitória do Espirito Santo
Antonio Espirito-Santo
Antônio Henrique Villela Alves
Antonio J. Marques Cardoso
António João Pina da Costa Feliciano Abreu
Arif Karabuga
Assed Haddad
Assed N. Haddad
Assed Naked Haddad
Atilio S. Gameiro
Attila Bonyár

top

B

Barbara Klemczak
Bárbara Stéphanie Guedes Lima
Beato, Cláudia
BELAGRAA Larbi
BENHASSINE Mohammed Tayeb
Ben-Hur de Albuquerque e Silva
Bernardo Horowitz
Bertha Maria Batista dos Santos
Bertha Santos
BOUGLADA MOHAMMED SALAH
BOULIFA
BOUZID A
Bruno Ferreira
top

C

C. A. Figueiredo Ramos
Camila Silva Ribeiro
Carlos Filipe Ferreira de Oliveira
Carlos Hugo Ribeiro Mendes
CARLOS JESUS
Carlos M. C. Santos
Carlos Miguel Alves Sa
Carlos Xisto
Carmen Carvalheira
Carmen de Jesus Geraldo Carvalheira
Carolina Fonseca
Catarina Pinto Mouraz
Catarina Valente
César Silva
Cristian Solé
Cristiana C. Pereira
Cristiano Alves Bentes
Cristina Faustino Agreira
Cristina Isabel Ferreira Figueiras Faustino Agreira
Cristina Maria Sena Fael
Cynara Fiedler Bremer

top

D

D. S. B. Fonseca
D.J.M. Santos
Daniel Filipe da Silva Cardoso
Daniel Parente
Daniela Pereira
Danielle Costa Castro
Danielle Fajardo de Oliveira
David Brandão Nunes
Davide Joel Dias Fructuoso
Débora Lima
Débora Peçanha de Almeida Couto
Débora Peçanha de Almeida Couto
Denis A. Coelho
Diana Dias Ferreira
Dieter Boer
Dinis Gardete
Diogo J. M. Santos
Dobrovolskij, Valerij
Dominik Dorosz
Douglas Souza Vieira

top

E

Edgar Vladimiro Mantilla Carrasco
Eduardo Antonio Carazo Lefort
Eduardo Cabaleiro Cortizo
Eduardo Ferreira de Andrade
Eduardo Linhares Qualharini
Eduardo Miguel González Fraile
Enrique Jerez Abajo
Estaner Claro Romão
Estéfane da Silva Lopes
Eurico Seabra
Ezddin Hutli

top

F

F.V. Antunes
Fátima L. Vieira
Fernanda Rodrigues
Fernando B. Santos
Fernando Gonçalves
Fernando J. A. Goncalves
Fernando Jorge Gonçalves
Fernando Jose da Silva
Fernando Manuel Bigares Charrua Santos
Fernando Zaparaín
Filipe Batista Ribeiro
Filipe Dias
Filippo Berto
Flávio Antunes
Flora Silva
Francisco Miguel Ribeiro Proença Brójo
Frederico Rodrigues
Fuad Aliew

top

G

Gabriel Gade Martins Mesquita
Gamze Yakut
Gheris Abderrahim
Gisele Blak Bernat
Gláucia Elisa Santos Araújo Mathias
Glauco Barbosa da Silva
Gonçalo Sousa
Guilherme Santos

top

H

Helder Gomes Costa
Helder Jose Aragao Martins
Hélder Puga
Helena Elias
Helena Maria Neto Dias Alves
Helena Rosmaninho Alves
Henrique Azevedo
Hipólito José Campos de Sousa
Hugo Daniel Leitao Canilho

top

I

Iberê Pinheiro de Oliveira
Ilda Inácio Rodrigues
Inês Daniel de Campos
Inês Flores-Colen
Ines I. G. Marcelino
Inês Marcelino
Inês Ramos da Cruz
Inês Xavier
Ingrid Martorell
Isabel Torres
Isabella Falcão da Silva Campos
ISMAIL Abdulakeem

top

J

J. M. F. Calado
J. Mendes da Silva
J.Barbosa
J.D. Costa
J.W. Gomulka
Jacek Chmielewski
Jacek Zmojda
Jacqueline Furlan
Jairo Aparecido Martins
Javier Benlloch Marco
Joana Morais Sarmento
Joanna W. Gomulka
João Monteiro
João C. Pantoja
João Carlos Goncalves
João Carlos Goncalves Lanzinha
João Carrilho
João Freitas
João Gomes Morgado
João H. Negrão
João Paulo Teixeira
João Rei
João Sá
João Sena Martins
João Viegas
Joaquim Gilmar Ornelas de Azevedo
Joaquim Macedo
Joel Oliveira
Jordlly R. B. Silva
Jorge Falorca
Jorge Humberto Gaspar Gonçalves
Jorge Manuel Pereira Gregório
Jorge Miguel dos Reis Silva
Jorge Miguel Guedes Rebelo
Jorge Ramos Jular
José A. M. Felippe De Souza
José A. R. Pacheco de Carvalho
Jose Antonio Raimundo Mendes da Silva
José Barahona da Fonseca
José Carlos Cardoso
José Carlos Paliari
José Carlos Páscoa Marques
José Dinis Silvestre
José Duarte Moleiro Martins
Jose F. Rocha
José Fernando Gomes Requeijo
José Gomes Requeijo
José María Jové sandoval
José Matias
José Meireles
José Nunes
Jose P Carvalho
José Pereira
Juan Pedro Ruiz Fernández
Juliana Alves

top

K

Karine
Karoline Figueiredo
Kawser Ahmed
Kerry London
Kouamana Bousson

top

L

L. A. S. Marques
L. BELAGRAA
L. M. Ferreira Gomes
Laísa Cristina Carvalho
Lamis Rabiaa Chadi
Larbi Belagraa1
Laura Khammash
Leandro Torres Di Gregorio
Leizer Schnitman
Lídia Maria Gil Catarino
Lídia Rincón
LOUKAM Imed
Luana Camelo
Luca Mantecchini
Lucas Gonçalves de Moura Jorge
Luciana Santos Ferreira
Luciano de Oliveira
Ludovic Leclercq
Luís Alexandre Correia
Luís Duarte
Luís F. A. Bernardo
Luís F. Silva
Luís Fernando de Sousa Ferreira da Silva
Luís Ferreira da Silva
Luis Filipe Mesquita Nero Moreira Alves
Luís Gonçalves
Luís J. Andrade Pais
Luís M. Batista
Luís M. Ferreira Gomes
Luis Otavio Cocito de Araujo
Luis Picado-Santos
Luís Pinto
Luis Pinto de Andrade
Luis Pires
Luis Silva
Luís Taborda-Barata
Luisa F. Cabeza
Luisa Rita Brites Sanches Salvado
Luiz A. Pereira-de-Oliveira
Luiz Henrique Costa Oscar
Luiz Rogério Napoleão
Luiz Torres

top

M

M. Ramiro Pastorinho
Mafalda Sampayo
Magdalena Rogalska
Mai Lan Tran
Maiane Ramos da Silva
Malgorzata Sztubecka
Manuel Gameiro
Manuel Mendes Duarte
Manuel Pinto
Marc Medrano
Marcelo Santana Silvino
Márcia Lopes Afonso
Marcin Gorski
Marcin Kochanowicz
Marcin Olszowski
Marco Canario
Marco Ivo Frazao Pedroso
Marcos Vinicius de Jesus Faria
Marcus Andre Siqueira Campos
Marcus Vinicius Arruda Plaisant Mariz Filho
Maria do Céu Ferreira
Maria Elisa Albuquerque Silvestre
Maria Emília Amaral
Maria Emília da Silva Baltazar
Maria Emília dos Santos Baltazar
Maria Eugénia Ferrão
Maria Inês Almeida Barata Alves da Cunha
Maria Joao Fontes
Maria Mrówczyńska
Mariana Batalha
Mariana Costa dos Reis
Mariana Faria Fonseca
Mariana Palumbo
Mariangela de Moura
Marina Silviano Brandao Ribeiro
Marisa Dinis-Almeida
Mariusz Uchronski
Marta Anna Skiba
Marta Nascimento
Marta Skiba
Matthew Redmond
Melik Ziya Yakut
Michael Mendes Santos
Michele Trancossi
Mieczyslaw Wodecki
Miguel Andrade
Miguel Ángel López Guerrero
Miguel Ângelo Rodrigues Silvestre
Miguel Augusto Najar de Moraes
Miguel João Mendes do Amaral Santiago Fernandes
Miguel Sousa
Milca de Freitas Coelho
Milos S. Nedeljković
MIRIAM RUIZ ÍÑIGO
Mohammad Najjar
Mourad Kaddeche

top

N

N. DJEBRI
Nadia Tebbal
Nara Ballaminut
Natália de Sá Bragança
Nayara Valeria Assis Marcelino
Nelia Valverde Gascueña
Nelson Carriço
NOUI Ammar
Nuno Garcia
Nuno M. Garcia
Nuno Miguel Carlos
Nuno Pombo
Nuno Rafael Valente
Nuno Sousa Carlos

top

O

Olívia Dias dos Santos
Oriola Kazeem Olaniyi

top

P

Pablo Llamazares Blanco
Patrícia A. Senra
Patrícia Aparecida Caxito
Patrícia Oliveira da Costa
Paula Correia
Paula Guinote
Paula M. R. Correia
Paula Prata
Paulina Cieśla
Paulo Barracosa
Paulo Gustavo Von Kruger
Paulo Manuel Oliveira Fael
Paulo N.B. Reis
Paulo Rebelo
Paulo Ribeiro
Paulo Sérgio Scalize
Pedro Alexandre Moreira Lobarinhas
Pedro Dinho da Silva
Pedro Dinis Gaspar
Pedro G. Almeida
Pedro Gamboa
Pedro Mêda
Pedro Prates
Pedro Sequeira
Petar B. Petrović
Phelipe Medeiros da Rocha

top

Q

top

R

Rafaella de Carvalho Vitale
Rafal Bialozor
Rafał Krzywoń
Raphaela de Paiva Mendonça
Raquel Amaro
Raquel de Pinho Ferreira Guiné
Renan O. Zocca
Resat Selbas
Rezgui Nourdine
Ricardo Branco
Roberta Bibbó de Almeida
Rodrigo Dourado
Rodrigo Nobre Dourado
Rogério M. S. Simões
Rogério Serôdio
Rogério Soares Leite da Silva
Rúben Daniel Martins de Abreu
Rúben Miguel Da Silva Piedade
Rui Miranda

top

S

Samai Mohammed Laïd
Samara Silva Soares
Sandra Cristina Alves Pereira
Sandra Melo
Sara Albuquerque
Sara Macedo
Sergi Vall
Sergio Batista
Sérgio Santos
Silva, J. Mendes
Silvério Rosa
Silvino Dias Capitão
Silvio Candido
Sinem Esen
Slawomir Biruk
Sónia D. Coelho
Sónia Sousa
Soraia E. B. Leitão
Szymon Dawczyński

top

T

Tales Dias Aguiar
Tebbal Nadia
Thaynara Azevedo Marques
Thiago da Silva Ferreira
Tiago Alexandre Rebelo
Tiago Baiao
Tiago de Abreu Carqueijo
Tiago E. P. Carrola
Tiago Grilo
Tiago M. S. Marcos
Tiago Nunes Sanches
Tomasz Ragin
Tomasz Szczuraszek

top

U

Úrsula Beltran

top

V

Valdemiro Marques Trindade
Vasco Reis
Vera L. D Costa
Verónica Vasconcelos
Victor Cavaleiro
Vitor Carneiro
Vitor Emanuel Rebelo Lopes
Vítor Fioroni Galiano
Vitor Hugo Pimenta Carneiro
Vitor Lopes
Vitorino Antonio Moreira Neves

top

W

Waldizia Maria Souza de Albuquerque
Wilton Fonseca Jr.
Wojciech Bozejko

top

Z

Z. Rahmouni
Zdzislaw Hejducki
Zine El Abidine Rahmouni

3D flow over a Backward facing step with Active Flow Control
5S computational tool adjusted to the systematic review of occupational health and safety procedures in agrifood industries
A dynamic traffic assignment model based on the Prospect User Equilibrium
A multi-species real gas model for the simulation of plasma flow in re-entry vehicles
Accessibility, Heritage and Project. Re-architectures for all.
Adhesion strength of flame sprayed ceramic coatings obtained by robotic projection
Airport Performance Analysis and Forecasting
Airships in Freight Logistics
Alpha Jet Fleet Maintenance Planning, after Phase-Out, of the Portuguese Air Force
An integrated approach to the supporting resources function of an information system for building maintenance management
Analysis of Buildings in Structural Masonry after – occupation.
ANALYSIS OF FLOW OF PEOPLE IN EMERGENCY SITUATIONS ACCORDING TO PRINCIPLES OF FLUID MECHANICS.
Analysis of textural properties in cheese incorporated with antioxidant rich berries
Analysis of the behavior of lime mortars with ceramic waste
Application of an infrastructure asset management methodology to a case study
Application of the Brazilian Standard of Performance in Habitation of Social Interest
Applying the learning-forgetting theory for scheduling repetitive construction processes
Architectural Project of Rehabilitation in a Building of Social House Case study: Pereiró neighbourhood – Oporto
Benefits of the Increase of Off-site Operations in Real Estate Developments
BIM concept and multiuse: nD/BIM models
BIM modeling: concept and use of parametric object
Business Aviation Service: The Case of Portugal’s Peripheral Regions.
Cellulose reinforced poly(lactic acid) composites prepared by a papermaking process
Challenges in management of waste solid and in the water supply in small municipalities in Brazil: case study in the municipality of Miranda do Norte – MA
Challenges of Forest Fires in Brazil
Challenges of the Fire Science and Cultural Heritage in Brazil
Characterization of fungal communities in house dust samples from asthmatic patients
Coal Generation Profile for the Day 2 Ahead Congestion Forecast
Coder and Decoder of Block 5B6B with Auxiliary Channel
Coder and Decoder of Block mBnB Specifically the 7B8B
Comparative cost analysis between prefabricated concrete system and cast-in-place concrete wall system
Comparison between design methods of glued-in rods in timber elements.
Computational tool to support decision-making in the management of energy sources used in agrifood industries
Consequence of the atmospheric pollution on the degradation to the coating facing of the Basilica of Saint Augustine in Annaba Algeria
Construction management supported in 4D/BIM and 4D/VR models
CONSTRUCTION PROJECT SCHEDULING TAKING INTO ACCOUNT THE RISK OF TEMPERATURES BELOW –10°C IN POLAND
Constructive Characterization of Gorongosa National Park Villages
Contribution to the knowledge of the Geothermal Energy Potential of the Guarda District
Cross Cultural Leadership in Engineering and Construction – Multinational Work Groups in Oman’s Oil Industry
Data collection methodology to assess airport pavement condition
Deciding on Maintenance of Small Municipal Roads Based on GIS Simplified Procedure
Decision-making in building projects with the aid of computational simulation
Defining Interventions’ Strategies for Santa Casa da Misericórdia Buildings
DEGRADATION OF THE MARES OF THE MEIA-PONTE RIVER IN THE URBAN AREA OF GOIÂNIA
Design, manufacture and testing of 3D printed vane anemometers
DETERMINING THE ELASTIC PROPERTIES OF LIGHTWEIGHT EXPANDED CLAY (LECA) PARTICLES BY FEA
Development of a 4 stroke opposed piston spark ignition engine
Development of a Coreless Permanent Magnet Synchronous Motor for a Battery Electric Shell Eco Marathon Prototype Vehicle
Development of a Test Rig for PVT Monitoring Using Cloud Services
Development of an experimental unit for studying the solar drying process
Development of super-insulating thermal renders: preliminary studies
Difficulties in Reaching Sustainable Transport Development in Poland Due to Dynamic Growth in Motorisation Rate
Digital culture and the mediatization of urban art practices
DIGITAL MANUFACTURING OF A BRIDGE IN POLYMERIC MATERIAL: A civil engineering teaching methodological proposal.
Disperson of toxic gases by 2D Numerical Simulation
Earned Value Analysis in the follow-up of projects in the Construction Industry
Effect of cardoon genotype on colour and texture of Serra da Estrela Cheese
Effect of Marble Fillers and Their Combination with Silica fume On the Durability of High Performance Concretes and Concrete in Marine Environment
Efficient procedure for the analysis of prestressed panels under membrane stresses using the rotating angle softened truss model (RA-STM)
Elasto-Plastic Shear Behavior of Reinforced Honeycomb and Auxetic Reentrant Lattices
Energy and Exergy Analyses of Ground Source Heat Pump System in a Hotel
Energy Monitoring System for Low-Cost UAVs
Energy simulation and experimentation of the thermal behavior of an earthbag building
Environmental monitoring of groundwater contamination per occurrence of metals in garbage dumps: Case Study in open dump of Miranda do Norte – MA.
Ergonomic Assessment Method for Task Analysis in the execution of the framework service: application of the OCRA instrument in the production of reinforcements
Evaluation and Adaptation of an automatic system for the detection of retinal lesions in its application to Age Macular Degeneration
Evaluation of Accessibilities in the Municipality of Covilhã using GIS
Evaluation of environmental impacts of building materials in the construction sector integrating BIM and LCA
Evaluation of leaching of heavy metals in permeable asphalt pavements and conventional asphalt pavements
Evaluation of the economic impact for the rainwater harvesting system´s tank in 5 Brazilian Cities
Evaluation of the Lisbon subway network and its expansion scenarios using graph centrality measures
Experimental Characterization of Dielectric Barrier Discharge Plasma Actuators for Boundary Layer Flow Control
Experimental evaluation of water production from atmospheric air by vapour compression refrigeration
Experimental study of a photovoltaic solar dryer
Experimental study of the thermal performance of a green roof: influence on the interior thermohygrometric conditions
Fire Risk Management in Cultural Buildings
Fort D. A. Russell: a new museum model. Matter, space, and colour in the Donald Judd’s rehabilitation of the artillery sheds in Marfa, Texas.
Geographic Information Systems in IP Asset Management support
GIS-based landslide susceptibility mapping using Information Value and Analytic Hierarchy Process methods in Constantine region, NE Algeria: case study of A1 Highway
Guidance and Robust Control of a double-hull Autonomous Underwater Vehicle
How Urban Design Could Improve Urban Health
Impact of recycled ground glass addition on strength properties of tungsten mine waste geopolymeric binder
Implementation of a FPGA Based Digital Thermometer
Implementation of Short-run Statistical Process Control in a wine Industry
Including In-service Conditions in the Design of Bituminous Mixtures Using the Compaction Energy
Influence of an Air – Entraining Agent with super plasticizer on the Rheology of Mortars
Influence of extraction time and volume of extracting solution on the phenolic compounds and antioxidant activity of strawberry
Influence of partial replacement of cement by Metakaolin in conventional concrete
Influence of seasonal factors in construction earned value.
INFLUENCE OF TEMPORAL SEASONALITY ON WATER QUALITY IN THE OPERATION OF WATER TREATMENT SYSTEMS
Information and communication technologies & electronics (ICTE) in agriculture
Information and communication technologies & electronics (ICTE)-based livestock biosignals monitoring system
Inspection, diagnosis and intervention strategies in the rehabilitation of multi-family buildings from the 60’s in Portugal
Intelligent Autonomous Controllers for Industrial Distributed System
Interfaces between building safety and the decisions in the design of the architectural project
LED technology in illumination systems: use methodology proposal focusing on shopping centers
Life cycle analysis of ceramic block wall and drywall building subsystems
Life Cycle Costing and Risk Management in the Construction Industry: review and implications
Logistic and probit regression models for road work zone crash analysis
Measures to support bicycle at road intersections – A case study
Metrology in healthcare services: Case Study in a Portuguese Hospital
Micro-simulation of airport taxiing procedures to improve operation sustainability: application of semi-robotic towing tractor
Modeling and simulation of a variable reluctance motor / generator to replace the flywheel
Modeling of the road network of the city of Guimarães. A case study associated with the impact of a new road.
Modelling of a Line-Start Permanent Magnet Synchronous Motor, Using Empirical Parameters
Models and systems of maintenance management – a review to introduce a comprehensive information system for buildings
Multiaxial fatigue life prediction in notched samples based on fatigue master curves generated from two strain-controlled tests
Multicriteria analysis for the comparison of the operational performance of airport terminals: Proposal and experimental analysis of Brazilian terminals
Non-destructive Microanalysis of Materials by Low Energy Ion Beams
Nonlinear Time-Varying Parameter Estimation from Noisy Measurements
Nonlinear Trajectory Optimization Along 4D Waypoints Based on Spline Parameterization
Optical methods for flow visualization, preliminary design set-up and test of a schlieren system for DBD plasma actuator induced flow analysis.
Optimal Robust Nonlinear LQG/LTR Control with application to Longitudinal Flight Control
Optimisation of mix design for a novel cellular concrete formulation
Overlay Design Methodologies for Flexible Road Pavements
Parametric modelling as a shift of decision-making process in structural engineering
Path Planning and Collision Avoidance Algorithms for Small RPA
PATs Preliminary Study to operate in Alexandre Aibeo Pipeline
Pavement Condition Index Determination and Interpretation for Airport Pavement Evaluation
PERCEPTION OF THERMAL GRADIENT
Performance of Web Applications
Polymer-cement based concrete – review of properties and possibility of application in structural members
Preliminary Analysis of the State of Conservation of the Church of São João Baptista in Angra do Heroísmo, Azores
Principles of Energy Efficient Building Design
Priority definition for railway activities
Problems Encountered with Computer Vision Techniques Application to Cavitation Cloud Contour Determination
Production of a new gluten-free bread and comparison with a regular wheat bread
Production of high performance yarns from nano/microfibrillated vegetal cellulose
Public art as a factor of transformation of contexts: the case of Kreuzberg, Berlin
Re-architectures. Methodological approach from the waste concept.
Re-colour
Recovery of historic buildings after being hit by fire
Recovery of the Industrial Heritage of Castilla y León
Removal of Cr, Cu and Zn from liquid effluents using the fine component of granitic residual soils
Residential mixed ventilation system: conception based on prNP 1037-5
RESTORATION OF ROYAL BUTCHER´S BUILDING IN MEDINA DEL CAMPO (VALLADOLID, ESPAÑA)
Risk assessment in collaborative innovation ecosystems based on fuzzy logic
Risk prevention by BIM
SCHEDULING SYSTEM OF TRANSPORT AND ASSEMBLY OF BRIDGE COMPONENTS
Selection of the most adequate suspension system for lower limb amputees: evaluation parameters
Six sigma business scorecard application in the management of innovation ecosystems
Soil Stabilization Using Plastic Waste from Package Labels
Strategies for the Portuguese Construction Sector – Trends, needs and work developed
Study and Analysis of Cavitation Damage Using Various Microscopy Techniques
Study of the effect of steel fibers on the rheological and mechanical properties of self compacting concrete (SCC)
Study of the mechanical response of cement with mineral additions by the method of experimental design
Study of total phenolic composition and antioxidant activity of fresh cheese with red fruits
Summary of in-stream energy production devices
Survey of Nonlinear State Estimation Based on Kalman Filtering
Sustainable Constructions: Case Study of the Museum of Tomorrow
Technical performance, heritage preservation and sustainability: a new challenge in rehabilitation?
Technical solutions for the thermal rehabilitation of buildings incorporating cork
The conceptualization of space in the religious context – proposed for an Adventist Temple
The Electricity as fires Activating Factor in Building
The importance of the opinion of residents in the refurbishment processes of residential buildings
The LEED Certification of stadiums of the World Cup 2014: Analysis of the legacy of measures and environmental impacts
The method of presenting noise perception in green areas
The Rehabilitation of Buildings as an alternative to sustainability in Brazil
The Ruin: Process from memory to intervention
The Urban Public Spaces in Rural Areas
The use of steel in Rehabilitation – Conceptual proposal in a factory of Covilhã
Thermal properties of textile materials: review of some models
Thermography in the Technical Inspection of Buildings
Urban Art – Angels or Demons
Urban mural: social semiotics in street art and advertising
Urban Rehabilitation operations through public art.
Use of condensed water from air conditioning systems
Ventilation and energy efficiency of buildings
Villas with heritage value: proposal for rehabilitation of the Pessanha’s Solar
Water-Energy Nexus: Review of Literature in Management of Integrated Systems, Challenges and Opportunities. Case Study in Urban Context
Web Application for the analysis of assessment tests